- Welding Tips[10]
- Tool Box[6]
- Packaging Boxes[1]
- Pneumatic Tools[6]
- Grinder[1]
- Dental Equipments[1]
- Electric Soldering Irons[10]
- Glue Gun[6]
- Heat Gun[8]
- Other Welding Equipment[4]
- Other Welding & Soldering Supplies[7]
- Other Electrical Equipment[1]
- Pliers[10]
- Other Hand Tools[1]
- Electronic Products & Components Processing[2]
- Temperature Instruments[1]
- Electric Heater Parts[1]
- Hot Melt Glue Sticks[1]
- Other Safety Products[3]
- Other Security & Protection Products[1]
- Contact Person : Mr. Xu Frank
- Company Name : Dongguan Century Hardware Tools St Co., Ltd.
- Tel : 86-769-86378488
- Fax : 86-769-86374998
- Address : Guangdong,Dongguan,4th Floor, Block C, City Industrial Development Corporation, Tongfu West Road, Shijie Town,Dongguan City, Guangdong Province,
- Country/Region : China
- Zip : 523290
Electric Ceramic element soldering iron with inner heating
50 W Outer heating soldering iron SJ-607
Functions,
1. Provided with special dual-construction heating element.
2.Contains glass fibersfor higher impact strength.
3.Dual insulation construction protects hands fro heat.
4.Made of SUS304 for high resistance to rusting and oxidation caused by heat.
5.Special iron coated tip (10 times the life of copper tip)
6.Welding for electric board .
Caution
1.To prevent fire , se an appropriate soldering stand .
2. Keep out of reach of children .
3.Never use the soldering iron if the power cord is damaged as this may result in fire or electric shock .
4.Plugging into an outlet other than the rated input voltage may result in overheating and fire .
5.To prevent electric shock , do not use the soldering iron in damp or wet locations or expose it to rain.
6.Be sure that the plug pins are pushed fully into the wall power receptacle . After use ,remove the plug from the outlet . Never yank the power cord to disconnect it from the receptacle .
7.After using , the tip is still very hot . Allow it to cool down sufficiently before touching the tip or storing the iron . Failure to d so wil result in serious burns or fire.
Note
1.The first time this iron is used , smoke may be produced , This will not occur during subsequent use.
2.Do not use water on a hot tip to cool it down as it may cause damage to the heater .
3.Do not use the iron without the tip as the heater may be damaged .
Maintenance
1.During and after use , tin and tip with solder . The tip may oxidize and become hard to wet if it is not tinned .
2.Once the iron has cooled , remove the tip , tip stopper and heater fixing screw . Remove any oxidized particles from within the heater .
3.If the tip is stuck to the heater , apply machine oil and leave it for half a day .
Packing information ,
1PC/blister card ,
20pcs/inner box ,
100pcs/export carton
N.W.: 9.5KG
G..W.:14.5KG
Electric Ceramic element soldering iron with inner heating
